Component Test
1/1
►Evap Leak Test
?
57
4) If the test has been initiated by the vehicle, a confirmation
message will be displayed on the screen.
Working
Command Sent!
Press any key to con.
z Some vehicles do not allow scan tools to control vehicle
systems or components. If the vehicle under test does not
support the EVAP Leak Test, an advisory message is
displayed on the screen.
.............Component Test
The selected mode is
not supported
Press any key to con.
5) Wait a few seconds or press any key to return to Diagnostic
Menu.
http://www.obd2be.com/
To Next Page
Loading...
