6
3) USB Cable -- Allows easy update through PC via internet connection and
charge battery.
3.4 Icons
1) -- Indicates battery volume.
2) -- Indicates USB communication with the computer is established.
3) -- Indicates the TPMS tool is sending signals to the tire sensor for
activation and test.
3.5 Keyboard
No solvents such as alcohol are allowed to clean the keypad or display. Use
a mild nonabrasive detergent and a soft cotton cloth. Do not soak the keypad
as the keypad is not waterproof.
3.6 Battery Charging
The tool has a 3.7v built-in lithium-ion polymer rechargeable battery.
To charge battery by USB cable
Locate the USB port of the device.
Connect the device and the computer with the USB cable.
For optimum performance, always keep your tool sufficiently charged. It is
recommended that you charge the tool for at least 2 hours before the first use.
NOTE
Only use the USB cable that is included in our pack to charge this tool. The
use of un-approved power supplies may damage your tool and void the tool
warranty.
To Next Page
Loading...
