Beep Set
This function allows you to turn on/off the build-in speaker for key
pressing.
1) From System Settings screen, use the UP/DOWN SCROLL
button to select Beep Set, and press the Y button.
Figure 3.10
2) From Beep Set menu, use the UP/DOWN SCROLL button to
select Beep ON or Beep OFF to turn on/off the beep. (Figure
3.11)
3) Press the Y button to save your selection or the N button to
cancel and return to the previous menu.
Figure 3.11
Wheels to Test
This function gives you choice to test TPMS sensors in ALL Wheels
mode or One Wheel mode.
To Next Page
Loading...
