1) From System Settings screen, use the UP/DOWN SCROLL
button to select Wheels to Test, and press the Y button.
Figure 3.12
2) From Test Unit menu, use the UP/DOWN SCROLL button to
select All Wheels or One Wheel mode for TPMS sensor testing.
Figure 3.13
3) Press the Y button to save your selection or the N button to
cancel and return to the previous menu.
NOTE: In All Wheels mode, the tool will determine if a
duplicate sensor ID has been read. In this case, the tool will
display a message “Sensor ID Duplicate.” In One Wheel mode,
the tool will not check the duplicate sensor ID.
Auto Power-off
1) From System Settings screen, use the UP/DOWN SCROLL
button to select Auto Power-off, and press the Y button.
To Next Page
Loading...
