26
on the left side to create an ID.
4. Enter the required information in the input fields, and click the Get
Verification Code button to get the verification code for email
validation.
5. The online system will automatically send a verification code to the
registered email address. Input the code in the Verification code field
and complete other required fields. Read through Autel’s Terms and
Conditions and click on Agree, and then click Create Autel ID at the
bottom. A product registration screen will display.
6. The device’s serial number and password is located in the About section
of the Settings application on the tool.
7. Select your product model, enter the product serial number and
password on the Product Registration screen, and click Submit to
complete the registration procedure.
Update Procedure
Autel releases software updates regularly.
Connect the tool to a Windows computer using the supplied USB cable,
power on the tool and select Update on the Main Menu screen to enter
update mode.
Follow the update procedure to finish updating.
1. Select Update on the My Device Menu to enter Update Mode.
2. Run Autel Update in the PC Suite program. Wait for the Log In window
to display.
Figure 5-4 Sample Log In Window
3. Enter your Autel ID and password and wait for the Update window to
display. If you forget your password, click the [Forget Password?] to
To Next Page
Loading...
