27
retrieve password.
4. In the Update window, select the vehicles to install. Be sure to
download system or firmware updates and updates of needed vehicles.
Figure 5-5 Sample Update Window
There are two ways to update the vehicle software:
Batch Update
1. Click the Update Selected Items button on the right side of screen. Or
2. Check the Select All box on the right side of screen and all updatable
items will be selected. Click the Update Selected Items button on the
right side of screen.
3. Monitor the updating process by watching the upper left progress bar
[Downloads] and upper right progress bar [Installs]. Download and
Install progress also displays in the Status column of updated items.
4. Click Pause button on the right side of screen to suspend all downloads,
status displays as STOPPED.
5. To resume update, select suspended items and click the Update
Selected Items button. The progress will resume from the break point.
6. When the download is complete, programs will be installed
automatically.
Single Update
1. Choose desired software update and Click Install.
2. Monitor update by viewing upper left progress bar [Downloads] and
upper right progress bar [Installs]. Down and Install progress also
displays in the Status column of updated items.
3. Click the Pause button to suspend download. And the state of this item
would change to STOPPED.
4. To resume update, click Install button again. The download will resume
To Next Page
Loading...
