OM-261 661 Page 4
SECTION 2 − SPECIFICATIONS
Cartridge Dimensions 4.33 x 3.54 x 0.39 in. (110 x 90 x 10 mm)
Viewing Field 3.82 x 1.81 in. (97 x 46 mm)
Reaction Time 0.000083 Second (1/12,000 Second)
Available Shades Darkened State: No. 9 − No. 13 / Light State: No. 4
Sensors Independent/Redundant (Two)
Operating Temperature 23F to 131F / −5C to +55C
When stored in extremely cold temperatures, warm
helmet to ambient temperature before welding.
Storage Temperature 14F to 158F / −10C to +70C
When stored in extremely cold temperatures, warm
helmet to ambient temperature before welding.
Power Supply CR2450 Lithium Battery (1)
Total Weight 16.7 oz (475 g)
Standards ANSI Z87.1-2010 and DIN/CE/TUV/CSA
Warranty One Year From Date Of Purchase (See Section 11)
Sensitivity Control Light Levels Adjusts For Varying Ambient Light And Welding Arc
Delay Control Slows Lens Dark-To-Light State Between 0.1 And
1.0 Seconds (Infinite Dial Control)
Automatic Power Off Shuts Lens Off 15−20 Minutes After Welding Stops
Low Battery Indicator Red Led Light Goes On To Indicate Low Battery
Grind mode Yes
Work like a Pro!
Pros weld and cut
safely. Read the
safety rules at
the beginning
of this manual.
To Next Page
Loading...