AUTO ARC Explorer Series - Section 3 − Operating Instructions; Helmet Controls; Low Battery Indicator

OM-261 661 Page 5
SECTION 3 − OPERATING INSTRUCTIONS
3-1. Helmet Controls
 The auto-darkening lens turns on
(darkens) automatically when
welding begins and turns off 15 −
20 minutes after welding stops.
1 Weld On/Grind On Switch (See
Section 3-3)
2 Variable Shade Control (See
Section 3-5)
3 Sensitivity Control
(See Section 3-6)
4 Delay Control
(See Section 3-4)
5 Battery Compartment (See
Section 6)
6 Low Battery Indicator
(See Section 3-2)
1
2345
6
3-2. Low Battery Indicator
 The auto-darkening lens turns on
(darkens) automatically when
welding begins and turns off 15 −
20 minutes after welding stops.
1 Low Battery Indicator
The low battery indicator lights when
2−3 days of battery life remain.
If battery power is low, install new
CR2450 lithium battery.
1