SAFETY DECAL SECTION
3203 SERIES
2-17.0.0
05/22/2003
PART NO.: 040587000 USED ON: All cranes equipped with a load
sensor.
DECAL: LOAD SENSOR, DON'T TAMPER QUANTITY: 1
FUNCTION: To inform the operator that the load
sensor is pre-set and that tampering
with the sensor may cause potentially
hazardous situation.
PLACEMENT: On the lift cylinder near the load
sensor
PART NO.: 040519000 USED ON: All cranes.
DECAL: SCISSORS POINT QUANTITY: 1
FUNCTION: To inform the operator of possible
danger at scissors point on crane.
PLACEMENT: Both sides of the lift cylinder
To Next Page
