12
© 2012 Directed. All rights reserved.
Runtime Reset
Press and release
If more time is needed while remote start is active, runtime reset
will reset the runtime counter to the pre-programmed setting. The
RUNTIME
text and tones play to confirm. The text field will update
if set to display runtime.
Note
Remote Start must be On to use this feature.
Temp Request
Press and hold the button
Requests the vehicle’s interior temperature and temporarily displays it
via status screen icon
and text field.
* See “Remote and System Operations” in online guide.
** See “Alarm Features” in online guide.
To Next Page
Loading...
Need help?
General
