13
© 2012 Directed. All rights reserved.
Advanced Commands: (Level 2)
Press and release the button 2 times.
Sensor Bypass
Press and release
The parking lights fl ash each time this command is received to indicate
the Sensor bypass type. 2 fl ashes indicates sensor Warn-away zones
are bypassed.
BYPASS WARN
, 1 beep and 1 fault tone play to con-
fi rm. 3 fl ashes indicates sensor Warn-away and Full Trigger zones are
bypassed.
BYPASS FULL
, 1 beep and 2 fault tone play to confi rm. 1
fl ash indicates sensor bypass is Off,
BYPASS OFF
and 1beep play
to confi rm..
Note
System needs to be armed to perform Sensor Bypass.
Perform arm command any time to turn Sensor Bypass Off.
Remote Valet
Press and release
Enters (or if On, exits) Valet Mode. The
VALET
text and beeps (1 for
On, 2 for Off) play to confi rm and the System Status icons update.
See Valet Mode for more details
AUX 2
Press and release
AUX
Activates (or if On, deactivates) the Aux 2 output. The
AUX CHANNEL
text and On tones or Off tones play to confi rm.
To Next Page
Loading...
Need help?
General
