ENGLISH
34/78
6.6 - MODE OF OPERATION (COOLING OR HEATING)
“U-GO” can operate in two modes: COOLING or HEATING.
Based the chosen operating mode, the tubing must be connected accordingly.
WARNING: it is necessary that all air intake and air output openings of “U-GO” are maintained free of debris or
obstructions; place “U-GO” where there is enough space around, and not, for example, next to curtains; do not
place clothes, rags or any other object which may obstruct the airflow.
COOLING MODE: connect the two flexible tubing (B) between “U-GO” (openings 3 and 4) and the snorkel (E)
by means of the entrance nozzles (C) located at the tips of the tubing. Cool air will exit from outlet air nozzles
1 and 2.
If you wish to ventilate air remotely, connect the other (1 or 2) supplied flexible tubing (B), securing them to the
outlet air nozzles (1 and 2).
To Next Page
Loading...