Need help?Do you have a question about the Autoclima U-GO and is the answer not in the manual?
General| Type | Portable air conditioner |
|---|---|
| Voltage | 12V |
| Refrigerant | R134a |
| Fragrance Type | Not applicable |
| Mounting Type | Portable |
| Material | Plastic |
Details about warranty activation and conditions for voiding it.
DIY installation, manufacturer's intended use, and environmental restrictions.
Crucial safety measures for installation, operation, and handling to prevent accidents.
Describes "U-GO" as a portable, DIY air conditioner for trips and stops, enhancing comfort.
Highlights cooling, warming functions and suitability for both idle and moving vehicles.
Mentions simple, non-invasive installation and use of environment-friendly R134a refrigerant.
Discusses various placement options within the vehicle cabin based on driver needs.
Enumerates all components provided with the "U-GO" unit, including cooler, tubing, and accessories.
Provides the physical external dimensions of the "U-GO" unit.
Details cooling/heating capacity, voltage, power consumption, air flow, and coolant type.
Lists compressor type, battery saver, remote control, and timer features.
"U-GO" can be placed on passenger seat, foot well, central tunnel, or cot, ensuring it's horizontal.
Instructions on how to securely fasten the "U-GO" unit to the vehicle seat.
Alternative method using a supplied sling to secure the unit in different locations.
How to connect to a vehicle's utility power outlet, requires compatible counterpart.
Need for an extra bridle (G.1) when moving the unit between vehicles.
Connecting to vehicle's power/grounding points behind the dashboard.
Connecting the unit directly to the vehicle's battery terminals.
Connecting flexible tubing between "U-GO" and components using entrance nozzles.
Guidance on routing tubing for best performance, emphasizing short paths and few curves.
Steps for attaching and detaching flexible tubing using nozzles and winglets.
Connecting tubing to the side window using snorkel (E) and gasket (F).
Ensuring visibility is not compromised and discussing gasket positioning options.
Securing the gasket to the window and potential need for replacement for different vehicles.
Integrating the snorkel and adjusting the window to fit the gasket.
How to connect tubing for cooling mode, with cool air exiting from specific outlets.
Keep air intake/output clear; ensure adequate space around the unit.
Details on air circulation in cooling mode.
Connecting tubing for heating mode, with warm air exiting from opening 4.
Operation via control panel or remote; settings adjustments are panel-only.
Warning about qualified personnel needed for changing settings to prevent damage.
Covers on/off, mode switching, power levels, ventilation, and temperature controls.
Enables automatic startup of the unit after a set delay.
Procedure to enter settings menu and navigate through options.
Adjusting operation timers and temperature display units (C/F).
Modifying temperature offset and condenser fan speed settings.
Customizing cut-out and cut-in voltage levels for the battery saver.
Comprehensive list of error messages, their causes, and troubleshooting steps.
Specific guidance for errors like battery voltage, fan overload, and compressor issues.
Ease of moving the "U-GO" between vehicles without specialized assistance.
Instructions for correctly using the included sling for safe and easy transport.
Information on specific gasket or wiring kits needed for different vehicle models.
Information about the manufacturer, product description, and model number.
Details conformity with relevant community directives and standards.
To Next Page
