AutoDab Connect - Recalling Presets and Auxiliary Mode

AutoDAB Connect User Guide
15
Note:
This function only recalls the stations saved in the Memory Preset List of the
particular DAB Preset Mode (please refer to To Set a DAB Preset Mode
section).
To Recall the Last Listened Digital Station
The AutoDAB Connect automatically remembers the station that is last listened to. This
allows you to go back to last listened DAB station quickly; even it is not in the Memory
Preset List.
1. Press BACK to recall the station that was most recently listened to. The screen
will show 《 LS EMPTY 》 if the last listened station has not memorized a station
name yet or 《 station name 》if it has.
2. Press the Rotary Knob or after a 3 seconds timeout to switch to the last listened
station.
To Set the Auxiliary Input mode
The AutoDAB Connect provides the capability to play audio device such as MP3 or
iPod
®
etc. through your car radio.
1. Press the Rotary Knob then AUX to set the listening mode to auxiliary input
mode and start listening to the audio device. The screen will then show 《 DONE
》, and then 《 AUXMODE 》.
Note:
While in Auxiliary Input mode, to listen to the last listened DAB station, you
must press the Rotary Knob and then press DAB to tune to the last listened
DAB station and return to the DAB preset mode that was last listened to.
While in Auxiliary Input mode, to recall a preset DAB station, you must press
a PX button directly (where X is from 1 to 4) to return to the DAB preset mode
that was last listened to and tune to the DAB station saved in the memory
preset PX. If the memory preset PX pressed is empty then AutoDAB
Connect will tune to the last listened DAB station instead.