AutoDAB Connect User Guide
20
MENU SETTINGS
You must press the Rotary Knob then MENU button to enter the menu function, rotate the
Rotary Knob [◄] [►] to select a menu setting, and then press the Rotary Knob to confirm
the selection.
To Reset FM Transmitting Frequency Setting
This function allows you to reset the FM transmitting frequency to the default setting
FM 87.6MHz.
1. Reset AutoDAB Connect’s FM transmitting frequency by either way below:
a. Enter the menu function, the screen will show 《 87.6MHz 》. Then, Press
the Rotary Knob to reset FM transmitting frequency to 87.6MHz.
b. Press and hold BACK twice in succession to reset FM transmitting frequency
to 87.6MHz.
2. Press FM preset of your car radio to the frequency 87.6MHz if you have
previously saved for DAB reception. Otherwise, tune the car radio to FM
frequency 87.6MHz manually.
To Enable DLS/DL+ Display
When you enable DLS/DL+ Display, the radio will show DLS information such as song
titles, music types and news or traffic updates from the station if DLS is being received,
or DL+ information, song track, song artist if DL+ is being received.
1. In the menu function, rotate the Rotary Knob [◄] [►] until the screen shows
《 RADIOTXT 》.
2. Press the Rotary Knob to enter radio text selection operation.
3. Then you can rotate the Rotary Knob [◄] [►] until the screen shows《 ON 》 to
enable the DLS/DL+ display on radio.
4. Or you can rotate the Rotary Knob [◄] [►] until the screen shows 《 OFF 》to
disable the DLS/DL+ display on radio.
5. Finally, press the Rotary Knob to set the DLS/DL+ display. The screen will then
show 《 DONE 》.
Note:
The default DLS/DL+ setting is ON.
To Next Page
Loading...