AutoDab Connect - Performing Resets and Displaying Version

AutoDAB Connect User Guide
24
To Perform DAB Reset
1. In the menu function, rotate the Rotary Knob [◄] [►] until the screen shows
《 DABRESET 》.
2. Press the Rotary Knob to perform a reset operation for DAB Presets.
3. If you do want to reset, rotate the Rotary Knob [◄] [►] to find《 YES 》and then
press the Rotary Knob for confirmation. Otherwise, you can press the Rotary
Knob to cancel while the screen is showing 《 NO 》. The screen will show
《 RESETING 》to indicate that DAB reset is in progress.
Note:
DAB reset will erase the station list but keep the memory presets for all DAB
Presets, and then perform a full scan of DAB stations automatically after the
DAB has reset. It does not erase the current FM transmitting frequency and
all FM transmitting frequency presets.
To Restore to Factory Settings
1. In the menu function, rotate the Rotary Knob [◄] [►] until the screen shows
《 FACTORY 》.
2. Press the Rotary Knob to perform a factory reset operation.
3. If you do want to reset, rotate the Rotary Knob [◄] [►] to find《 YES 》and then
press the Rotary Knob for confirmation. Otherwise, you can press the Rotary
Knob to cancel while the screen is showing《 NO 》.
3.1 The screen will show《 RESETING 》to indicate that factory reset is in
progress.
3.2 The system will perform a scan of DAB stations automatically after the factory
reset is completed. You must switch the car radio to FM 87.6MHz to continue
DAB listening.
Note:
Factory reset will erase all previous system’s settings and set them to default.
To Display Software Version
This function allows you to display the current software version of your AutoDAB
Connect.
1. In the menu function, rotate the Rotary Knob [◄] [►] until the screen shows
《 VERSION 》.
2. Press the Rotary Knob to display the software version, the screen will show the
current software version number《 x.x.x.x 》.