AutoDab Connect - Reception Problems and Sync Solutions

AutoDAB Connect User Guide
27
Operating on AutoDAB Connect
 Enter the menu function, the screen will show 《 87.6MHZ 》 , then press
Rotary Knob to reset FM transmitting frequency to 87.6MHz; or
 Or press and hold BACK twice in succession to reset FM transmitting
frequency to 87.6MHz.
b) Reset to frequency that has been saved in FM frequency preset 1
Operating on Car Radio
 Press FM preset of your car radio corresponds to the same frequency as in
AutoDAB Connect’s FM frequency preset 1, if you have previously saved for
DAB reception. Otherwise, tune the car radio to that FM frequency manually.
Operating on AutoDAB Connect
 Press and hold BACK to reset FM transmitting frequency to FM frequency
preset 1.
3. If AutoDAB Connect is in AutoScan mode, the FM channel you selected for DAB
mode may be occupied by an existing radio station. You need to change the
frequency settings of FM Transmitter. Please refer To enable AutoScan to set a
suitable new frequency.
 If you hear static noise or a FM program and before AFC tunes to a clear
frequency, you can force an immediate frequency change manually by one of the
following:
Refer to FM Transmitting Frequency Settings section:
1. Set FM transmitting frequency manually
2. Recall FM transmitting frequency saved in the memory
3. Force immediate FM transmitting frequency change
4. Set FM transmitting frequency to memory preset F1
Refer to MENU SETTINGS section:
5. Reset FM transmitting frequency to default 87.6MHz