Maintenance and repairs
> It is forbidden to perform any repairs or modications to the lifting device.
> Make sure that the stainless steel shaft connecting the gearboxes of the product is not
bent (e.g. by running over the lifting device, not respecting the lower stop limit etc.).
> Make sure that no dirt (sand, dust, etc.) gets into the moving parts of the product.
> The manufacturer recommends to follow a rest cycle of the product (due to cooling of
the operating lubricants). Recommended rest period between lifting cycles: 5 minutes.
> The lifting device is maintenance-free. Never open the gearboxes, do not add any
lubricants or oils. This could cause product seizure, which is not covered under
warranty.
> If any damage occurs, take several photos of the problem and contact our customer
service at info@autoliftproduction.com.
Thank you for reading this far and we
wish you a pleasant experience with our
product.
Please follow all manufacturer's
recommendations, you will save yourself
and us unnecessary worries.
If you have any further questions, please
contact our customer service:
info@autoliftproduction.com
44 45
To Next Page
Loading...
