Automatic Technology GDO-9v2 SecuraLift - Kit Contents

10
GDO-9v2 SecuraLift
®
Owner Installation Instructions
Kit contents
02
fi g
01
fi g
OR
PLUS
Drive Unit
1 x GDO-9v2 SecuraLift® Trio drive unit (Fig. 01)
1 x TrioCode™ Transmitter pack (Fig. 01)
(Pack includes two keyring transmitters and batteries)
1 x Wall mount transmitter with battery (Fig. 01)
2 x Door attachment arms (Fig. 01)
1 x Accessory and hardware pack (Fig. 01)
1 x Manual Disengage Cord (Fig. 01)
1 x Installation Manual
Pre-Assembled Single Piece C-Rail
NOTE: The chain or belt in the one piece rail has been
tensioned by the factory. Do not adjust the tension of
the chain.
IMPORTANT NOTE: If a modifi cation to the length of the
track is required, the adjustment must be made from the
drive unit end only.
Pre-Assembled Multi Piece C-Rail
Note: The chain or belt in the multi piece rail has been
tensioned by the factory. Do not adjust the tension of
the timing belt.
IMPORTANT NOTE: If modifi cation to the track length
is required, adjustment must be made only from drive
unit end only.
03
fi g