To Next PageTo Next Page
Need help?Do you have a question about the Automatic Technology GDO-2 SecuraLift and is the answer not in the manual?
Comprehensive safety guidelines for operating and installing the garage door opener.
Automated setting of door travel limits without manual adjustment.
Automatic door reversal upon detecting an obstacle during closing.
Automatic door closing after a set delay following an open cycle.
Crucial safety warnings to be followed before commencing tube/pipe assembly.
Procedure to verify the door's balance and smooth operation before installation.
Detailed steps for mounting the opener onto a spring-loaded garage door.
Steps for attaching the door bracket and assembling the opener arms.
Setting open and close limits using the opener's control panel buttons.
Setting open and close limits using the remote control transmitter buttons.
Procedures for testing and adjusting the door's safety obstruction force.
Setting transmitters for door control, courtesy light, pet mode, and vacation mode.
Instructions for installing the optional Photo Electric Beam sensor.
General| Model | GDO-2 SecuraLift |
|---|---|
| Maximum Lifting Force | 1000 N |
| Drive Type | Belt Drive |
| Remote Control Frequency | 433.92 MHz |
| Battery Backup | Optional |
| Manufacturer | Automatic Technology |
| Type | Garage Door Opener |
| Motor Type | DC |
| Max Door Height | 3.5 meters |
| Maximum Door Size | 16.5 m² |
| Control Type | Remote Control |
| Remote Controls Included | 2 |
| Security | Rolling Code |
| Lighting | LED |
