EasyManua.ls Logo

Automatic Technology GDO-2 SecuraLift - Factory Default Settings; Technical Specifications

Automatic Technology GDO-2 SecuraLift
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE: 230V - 240V AC 50Hz
MOTOR TYPE: 1/3 H.P. (AC) Alternating Current
MOTOR VOLTAGE: 230V - 240V AC
MAXIMUM DOOR OPENING:
1,2
WIDTH: 5100mm
HEIGHT: 2400mm
WEIGHT: 100Kg
OPENER MAXIMUM RUN TIME: 30 Secs.
MAXIMUM LIFTING FORCE: 200N (20Kg)
RECEIVER TYPE: UHF 433.92 MHz. AM Receiver
RECEIVER CODE STORAGE CAPACITY: 23 x 4 Button Transmitter Codes
TRANSMITTER FREQUENCY: 433.92 MHz
CODING TYPE: Hopping Code
No. of CODE COMBINATIONS: Over 4.29 Billion Random Codes
CODE GENERATION: Non-linear Encryption Algorithm
PTX-4 TRANSMITTER BATTERY: A23 Alkaline 12 Volts
EAT-1 TRANSMITTER BATTERY: CR1220 Lithium 3 Volts
GLOBE: Edison (screw mount) 240V 60W
Rough Service (or construction type)
DEFAULT SETTINGS AND SPECIFICATIONS
21
Note:
1. The maximum door opening on which the SecuraLift
®
can be installed is 5100mm wide by 2400mm high. The door must be well
balanced. A person should be able to lift the door up manually with very little effort in case of an emergency.
2. Intermittent operations may occur in areas which experience very strong winds. The strong wind puts extra pressure on the door
and tracks which may in turn trigger the safety obstruction detection system intermittently.
DEFAULT STEP MAXIMUM
MAXIMUM MOTOR RUN TIME 30 Secs.
COURTESY LIGHT TIME 3 Mins. 10 Secs. 10 Mins.
OBSTRUCTION FORCE MARGIN 2 1 13
AUTO CLOSE TIME 0 Secs. 5 Secs. 4 Mins.
FACTORY DEFAULT SETTINGS

Related product manuals