To Next PageTo Next Page
Need help?Do you have a question about the Automatic Technology GDO-4 EasyRoller and is the answer not in the manual?
Hopping Code, ISS, Auto Close Mode, Photo Electric Beam, Safety Auto Run Time.
Warnings about incorrect installation leading to severe injury.
Explains how to set the open and close travel limits for the door.
Details the process for setting limits specific to left-hand installation.
Details the process for setting limits specific to right-hand installation.
Procedure to initialize the safety obstruction force calculation.
Tests the door's ability to detect and react to obstructions.
Instructions for installing the optional Photo Electric Beam sensor.
How to set the automatic closing delay time for the door.
Problems with door not operating, reversing, or closing/opening partially.
Transmitter not working, or issues with the drive unit button.
General| Model | GDO-4 EasyRoller |
|---|---|
| Category | Garage Door Opener |
| Manufacturer | Automatic Technology |
| Motor Voltage | 24V DC |
| Max Door Weight | 100kg |
| Maximum Door Size | 13.5m² |
| Drive Type | Chain Drive |
| Remote Control | Yes |
| Radio Frequency | 433.92 MHz |
| Battery Backup | Optional |
| Remote Controls | 2 |
| Operating Voltage | 240V AC, 50Hz |
| Remote Control Capacity | 64 |
| Motor Type | DC Motor |
