Need help?Do you have a question about the Automatic Technology Hiro GDO-12V1 and is the answer not in the manual?
Important instructions for personal safety and property protection during operation.
Warnings regarding electrical shock risks and grounding requirements.
General precautions for installation and operation to prevent injury.
Details on voltage, frequency, power, operating temperature, and load.
List of all components provided in the product kit for installation.
Checks for door balance, smooth operation, and compatibility.
Guidance on opener position, sideroom clearance, and power supply.
Instructions for attaching forks to the drive unit.
Conditions for opener use, including power failure and locked doors.
Steps for disengaging and re-engaging the opener manually.
Steps to prepare the door and its drum before installing the opener.
Procedure for safely securing the door during installation.
Mounting the opener unit onto the door axle and drum.
Configuring the fully open and closed positions for the door.
Testing the door's response to obstructions during operation.
Programming remote control buttons to operate the opener.
Critical safety guidelines for operating the garage door opener safely.
Basic operation, transmitter use, and battery replacement guidance.
Description of control panel buttons and their functions.
Explanation of the opener's LED lights and their meanings.
Regular checks for door cables, springs, and guide tracks.
Details on the service counter and how to reset it.
Table of symptoms, causes, and remedies for opener problems.
Parameters for adjusting light time, auto-close, and other functions.
Procedure for changing the opener's motor speed settings.
Detailed meanings of the opener's various LED indicator lights.
Method for setting door travel limits using a remote transmitter.
Programming transmitter buttons for extra features like light or vacation mode.
Conditions that void the warranty and requirements for its validity.
Procedure to follow when submitting a warranty claim.
Consumer rights under Australian law related to product warranties.
General| Remote Control | Yes |
|---|---|
| Radio Frequency | 433.92 MHz |
| Manual Release | Yes |
| Motor Type | DC |
| Input Voltage | 220-240V AC |
| Operating Temperature | -20°C to 60°C |
| Remote Control Range | 30 m |
| Installation Type | Ceiling Mount |
To Next Page