Need help?Do you have a question about the Automation Direct ProSense DPM1 Series and is the answer not in the manual?
General| Brand | Automation Direct |
|---|---|
| Model | ProSense DPM1 Series |
| Category | Measuring Instruments |
| Language | English |
Lists items included in the DPM1 Series digital panel meter package.
Provides guidance on the disposal of the electronic instrument according to EU directives.
Outlines instructions for safe installation and handling to ensure personal safety and prevent damage.
Explains the meaning of warning symbols for danger and electric shock.
Details the steps for installing the instrument into a panel, including panel cut-out and fixing clip usage.
Explains the two methods for programming the scale: SCAL and tEACH.
Describes how to configure and reset tare values using the UP key in RUN mode.
Explains how to view and reset the maximum and minimum values read by the instrument.
Details the procedure for resetting the peak (MAX) and valley (MIN) values displayed by the meter.
Describes the process to reset the meter to its factory default configuration parameters using code 74.
Describes how all parameters are locked out, allowing read-only access to programming mode.
Explains partial lockout where only non-protected parameters can be modified.
Details how DPM1 models with -2R option are equipped with 2 relays for alarm and control.
Explains how relay outputs activate based on setpoints, time delay, hysteresis, and HI/LO acting.
To Next Page