Automation Direct ProSense DPM1 Series - Input Configuration

DPM1 User Manual, 1st Edition
User Manual - DPM1 Series Panel Meters
12
Input Configuration
The figure below shows the input configuration menu.
Input Types
60U ±60VDC
10U ±10VDC
0.1U ±100mV DC
20nA ±20mA DC



 . 


ENTER: Enters configuration and
validates data and parameters.
UP: Increases value of blinking digit in configuration
mode.
SHIFT: Selects mode or shifts blinking digit in
configuration.
(Bottom View)
Programming Keys
(Bottom View)