AUTOMATOR INTERNATIONAL SRL – Via Meucci n.8–20094 Corsico (Mi) Italia
Tel 02 48601445 Fax 02 48601503 e-mail info@automator.com www.automator.com
Tel 02 48601445 Fax 02 48601503 e-mail info@automator. Com www.automator.com
Tel 02 48601445 Fax 02 48601503 e-mail info@automator. Com www.automator.com
in point 1.3.1 of the law - is guaranteed during the transport, assembly and disassembling , in the course of
occasion breakdowns and tests, when all these operations are carried out in compliance with the manual .
In the observance of the Regulation EN 292-2, the unit does not present alive edges, acute angles, surfaces rough
which could be cause of lesions to people; same step of leave in overhang or edges out of sheet which could
cause contusions or wounds
To install the unit , secure it with four bolts trough the hungers (Ref.114) to a rigid surface.
Fasten the bolts, with the inserts
The unit has to be firmly fixed to the support
The unit must not be subject to vibrations or movements.
The hungers can be removed if unnecessary
The unit must turn out fixed strongly to the support, that does not have to be subject to vibrations or movements
A wrong fixation of the machine to the table can provoke the fall or the unexpected
movement of the machine itself, causing damages to persons an/or things.
3.3 ADJUSTMENTS
Installation operations must be carried out by skilled, trained people, in total security
In case it is necessary to make the adjustment operations, switch off the machine
To Next Page
Loading...
Need help?
General