Automator MB19VP User Manual

AUTOMATOR INTERNATIONAL SRL – Via Meucci n.8–20094 Corsico (Mi) Italia
Tel 02 48601445 Fax 02 48601503 e-mail info@automator.com www.automator.com
Tel 02 48601445 Fax 02 48601503 e-mail info@automator. Com www.automator.com
Tel 02 48601445 Fax 02 48601503 e-mail info@automator. Com www.automator.com
Document
INSTRUCTION FOR USE
Code: MAN MBVPREV3
Ediz.n: 4
Del: 03/2012
Pag. 22/26
Edited by: U.T. VB
1.1.1.1.1.1
.
Appr. by: RB.
Machine:
VP UNITS
7 MACHINE DISMANTLING OR STOCKING
If the operator must ensure the integrity of the unit once decommissioning and reassembled at another location, you
must follow the instructions below
Disconnect the marking system from the power company
Carry out routine maintenance, and possibly in relation to the repeat unit downtime
Ie.. lubricate the pinion shaft (key 26) of the lever (key 35)
lubricate the mechanism through the opening and stop cap (Ref. 12)
lubricate the rack outside
lubricating grease the lever
Store the unit in a dry place, away from moisture and rust
If the unit has to be dismantled, it is mandatory to respect the national laws on waste.
In particular, the materials used for the manufacturing of the unit are not dangerous for the environment or for the
human health.
To dismantle the machine , the Operator has to consider the following materials :
• aluminium
• plastic
• steel
• iron
• pneumatic

Automator MB19VP Specifications

General

Brand	Automator
Model	MB19VP
Category	Industrial Equipment
Language	English