Automator MB19VP - Residual Risks

AUTOMATOR INTERNATIONAL SRL – Via Meucci n.8–20094 Corsico (Mi) Italia
Tel 02 48601445 Fax 02 48601503 e-mail info@automator.com www.automator.com
Tel 02 48601445 Fax 02 48601503 e-mail info@automator. Com www.automator.com
Tel 02 48601445 Fax 02 48601503 e-mail info@automator. Com www.automator.com
Document
INSTRUCTION FOR USE
Code: MAN MBVPREV3
Ediz.n: 4
Del: 03/2012
Pag. 23/26
Edited by: U.T. VB
1.1.1.1.1.1
.
Appr. by: RB.
Machine:
VP UNITS
8 RESIDUAL RISKS
The Operator should consider the following residual risks in its risk assessment according to the use of the
machine and its place of installation; the type of piece to be marked and specific operator training.
DANGER / ACTION
RISKS
RECCOMANDATIONS ON RISKS
1. Wrong installation of
the machine
• Cylinder leak
On this manual it is specified the necessary
pressure to supply the unit
1. Falling of the
machine during
transport
• Crush
Use the appropriate tools to move the machine
and respect the instructions
1. Marking on empty,
metallic parts
• Noise
Use adequate support to reduce the resonance
1. Maintenance
• Crunches
The maintenance has always to be operated with
the machine switched off