Autonics LE365S-41 - Program Check, Modify And Delete; Weekly Program Check, Modify, Delete; Yearly Program Check, Modify, Delete

K-97
(A)
Photo
electric
sensor
(B)
Fiber
optic
sensor
(C)
Door/Area
sensor
(D)
Proximity
sensor
(E)
Pressure
sensor
(F)
Rotary
encoder
(G)
Connector/
Socket
(H)
Temp.
controller
(I)
SSR/
Power
controller
(J)
Counter
(K)
Timer
(L)
Panel
meter
(M)
Tacho/
Speed/ Pulse
meter
(N)
Display
unit
(O)
Sensor
controller
(P)
Switching
power
supply
(Q)
Stepping
motor&
Driver&Controller
(R)
Graphic/
Logic
panel
(S)
Field
network
device
(T)
Software
(U)
Other
RUN mode
RUN mode
Weekly program
record No.1(
)
setting check
Yearly program
record No.1(
)
setting check
Weekly program
record No.1(
) setting
modify and delete
Yearly program
record No.1(
) setting
modify and delete
Weekly program
record No.2(
) setting
modify and delete
Yearly program
record No.2(
) setting
modify and delete
Weekly program
record No.n(
) setting
modify and delete
Yearly program
record No.n(
) setting
modify and delete
Weekly program
record No.2(
)
setting check
Yearly program
record No.2(
)
setting check
Weekly program
record No.n(
)
setting check
Yearly program
record No.n(
)
setting check
Program check, modify and delete
CHECK
CHECK
CHECK
CHECK
CHECK
CHECK
Weekly program check, modify and delete
Yearly program check, modify and delete
※
"YEAR" turns ON when check, modify or delete yearly
program.
● If any key is untouched for 60sec., it is returned to RUN
mode in weekly or yearly program check.
● In weekly or yearly program check, it controls output according
to program setting and output is OFF in modify or delete mode.
● When
MODE
key is pressed in weekly or yearly program
record modify, delete stand by or delete mode, current work
is cancelled and it is returned to check mode.
● Weekly or yearly program record modify and delete
Press
CHECK
key for 1sec.
Press
MODE
key
for 3sec.
Press
SET
key for 1sec.
Press
SET
key for 3sec.
Press
SET
key for 3sec.
Press
SET
key for 3sec.
Press
SET
key for 3sec.
Press
SET
key for 3sec.
Press
CHECK
key for 1sec.
Press
MODE
key
for 3sec.
Weekly/Yearly Timer
(1) Program record modify
①
When press
SET
key over 3sec. in program check, " "
fl ashes in second display part, press
SET
key.
②
It returns to check mode when fi nish the modify same as
the above procedure.
(2) Program record delete
①
When press
SET
key over 3sec. in program check, " "
fl ashes in second display part, press
or key until
" " fl ashes in second display part and press
SET
key.
②
Press " " key over 3sec. when
SET
turns ON in
second display part, it returns to program check.