Autonics LE365S-41 - Dimensions and Mounting; Front Panel Mounting; Surface Mounting; DIN Rail Mounting

K-88
LE365S-41
6
16
42.7
66 3
DIN rail
59
61
61.5
4
35
61
43
Panel
2-M3 TAP
※
Fix the Weekly/Yearly
timer on the panel with
M3 tapping screws.
6.8 60
44.8
48
48
①
Unscrew 1 bolts
from terminal block
Remove terminals from the body after unscrewing terminals screws, and then assemble terminals to the body after
rotating terminals as shown below.
(Front panel mounting)
(Surface mounting type) (DIN rail type)
③
Detach terminal
block from
case and rotate
it 180˚degree.
②
Detach the terminal
block after unscrew
terminal screws with
tools.
※
To raise panel holder,
tools must be used.
⑤
Screw terminals block
with a fi xing bolt.
④
Assemble case
and terminal
block
Dimensions & Mounting
How to switch from the fl ush mounting to surface or DIN rail mounting type
(unit: mm)
1) Front panel mounting
2) Surface mounting
3) DIN Rail mounting
● Panel hole cut-out
Min. 55
Min. 65
● Panel cut-out
45
+0.6
0
45
+0.6
0