Autonics TC Series User Manual

H-54
TC Series
Features
Economical Single Display Type, PID Control

Ordering Information

Specifications
Series TC4S TC4SP TC4Y TC4M TC4W TC4H TC4L
Power
supply
AC power 100-240VAC 50/60Hz
AC/DC power 24VAC 50/60Hz, 24-48VDC
Allowable voltage range 90 to 110% of rated voltage
Power
consumption
AC power Max. 5VA (100-240VAC 50/60Hz)
AC/DC power Max. 5VA (24VAC 50/60Hz), Max. 3W (24-48VDC)
Display method 7Segment (red), Other display (green, yellow, red) LED
Character size (W×H) 7.0×15.0
mm
7.4×15.0
mm
9.5×20.0
mm
9.5×20.0
mm
7.0×14.6
mm
11.0×22.0
mm
Input type
RTD DPt100Ω, Cu50Ω (allowable line resistance max. 5Ω per a wire)
Thermocouple K (CA), J (IC), L (IC)
Display
accuracy
※
1
RTD
At room temperature (23
℃
±5
℃
): (PV ±0.5% or ±1
℃
, select the higher one) ±1digit
Out of room temperature range: (PV ±0.5% or ±2
℃
, select the higher one) ±1digit
※
For TC4SP, add ±1
℃
by accuracy standard.
Thermocouple
※1:IncaseoftheACvoltagemodel,SSRdriveoutputmethod(standardON/OFFcontrol,cycle,control,phasecontrol)isavailableto
select.
※
2: It is unavailable for TC4SP, TC4Y.
※
3: 11-pin socket (PG-11, PS-11(N)) for TC4SP: sold separately.
● Realizes ideal temp. controlling with newly developed
PID control algorithm and 100ms high speed sampling
● Built-in relay output or SSR output selectable
: Enables to phase control and cycle control
with SSR drive output (SSRP function)
● Dramatically increased visibility using wide
display part
● Mounting space saving with compact design
: Approx. 38% reduced size compared with
existing model (depth-based)
● SV/PV deviation indicatable
Setting type
Item
Digit
Size
Alarm output
Power supply
Control output
N Indicator - Without control output
R Relay output + SSR drive output
※
1
2 24VAC 50/60Hz, 24-48VDC
4 100-240VAC 50/60Hz
N No alarm output
1 Alarm 1 output
2 Alarm 1 output + Alarm 2 output
※
2
S DIN W48×H48mm (Terminal block type)
SP DIN W48×H48mm (11-pin plug type)
※
3
Y DIN W72×H36mm
M DIN W72×H72mm
H DIN W48×H96mm
W DIN W96×H48mm
L DIN W96×H96mm
4 9999 (4digit)
C Set by touch switch
T Temperature controller
T S 1 4 R4C
※
1: Thermocouple L (IC) type, RTD Cu50Ω
At room temperature (23
℃
±5
℃
)
:
(PV ±0.5% or ±2
℃,selectthe
higher one) ±1digit
Out of room temperature range:

(PV ±0.5% or ±3
℃,selectthe
higher one) ±1digit
In case of TC4SP Series, ±1
℃
will be added.

Autonics TC Series Specifications

General

Control Method	PID control
Input Type	Thermocouple, RTD, Analog current, Analog voltage
Output Type	Relay, Current, Voltage
Display	LED
Power Supply	AC 100~240V, 50/60Hz
Communication	RS485 (Modbus RTU)
Approval	CE