Autonics TC4Y - User Manual

H-54
TC Series
Features
Economical Single Display Type, PID Control

Ordering Information

Specifications
Series TC4S TC4SP TC4Y TC4M TC4W TC4H TC4L
Power
supply
AC power 100-240VAC 50/60Hz
AC/DC power 24VAC 50/60Hz, 24-48VDC
Allowable voltage range 90 to 110% of rated voltage
Power
consumption
AC power Max. 5VA (100-240VAC 50/60Hz)
AC/DC power Max. 5VA (24VAC 50/60Hz), Max. 3W (24-48VDC)
Display method 7Segment (red), Other display (green, yellow, red) LED
Character size (W×H) 7.0×15.0
mm
7.4×15.0
mm
9.5×20.0
mm
9.5×20.0
mm
7.0×14.6
mm
11.0×22.0
mm
Input type
RTD DPt100Ω, Cu50Ω (allowable line resistance max. 5Ω per a wire)
Thermocouple K (CA), J (IC), L (IC)
Display
accuracy
※
1
RTD
At room temperature (23
℃
±5
℃
): (PV ±0.5% or ±1
℃
, select the higher one) ±1digit
Out of room temperature range: (PV ±0.5% or ±2
℃
, select the higher one) ±1digit
※
For TC4SP, add ±1
℃
by accuracy standard.
Thermocouple
※1:IncaseoftheACvoltagemodel,SSRdriveoutputmethod(standardON/OFFcontrol,cycle,control,phasecontrol)isavailableto
select.
※
2: It is unavailable for TC4SP, TC4Y.
※
3: 11-pin socket (PG-11, PS-11(N)) for TC4SP: sold separately.
● Realizes ideal temp. controlling with newly developed
PID control algorithm and 100ms high speed sampling
● Built-in relay output or SSR output selectable
: Enables to phase control and cycle control
with SSR drive output (SSRP function)
● Dramatically increased visibility using wide
display part
● Mounting space saving with compact design
: Approx. 38% reduced size compared with
existing model (depth-based)
● SV/PV deviation indicatable
Setting type
Item
Digit
Size
Alarm output
Power supply
Control output
N Indicator - Without control output
R Relay output + SSR drive output
※
1
2 24VAC 50/60Hz, 24-48VDC
4 100-240VAC 50/60Hz
N No alarm output
1 Alarm 1 output
2 Alarm 1 output + Alarm 2 output
※
2
S DIN W48×H48mm (Terminal block type)
SP DIN W48×H48mm (11-pin plug type)
※
3
Y DIN W72×H36mm
M DIN W72×H72mm
H DIN W48×H96mm
W DIN W96×H48mm
L DIN W96×H96mm
4 9999 (4digit)
C Set by touch switch
T Temperature controller
T S 1 4 R4C
※
1: Thermocouple L (IC) type, RTD Cu50Ω
At room temperature (23
℃
±5
℃
)
:
(PV ±0.5% or ±2
℃,selectthe
higher one) ±1digit
Out of room temperature range:

(PV ±0.5% or ±3
℃,selectthe
higher one) ±1digit
In case of TC4SP Series, ±1
℃
will be added.

Autonics TC4Y Specifications

General

Brand	Autonics
Model	TC4Y
Category	Controller
Language	English

Summary

Economical Single Display Type, PID Control

Key Features of TC Series PID Controllers

Highlights key functionalities like high-speed sampling, selectable relay/SSR outputs, and enhanced visibility.

TC Series Ordering Information Guide

Provides a detailed breakdown of model selection codes for TC series PID controllers.

TC Series Technical Specifications Overview

Details technical parameters including power supply, input types, accuracy, and display methods.

TC Series Dimensional Drawings

TC Series Panel Cut-out Dimensions

Specifies the required panel opening dimensions for TC series controllers.

TC Series Mounting Bracket Specifications

Details the dimensions and mounting methods for TC series brackets.

TC Series Terminal Cover Accessories

Information on optional terminal covers for TC series controllers.

TC Series Unit Description and Operation

TC Series SV (Set Value) Setting Procedure

Step-by-step guide on how to set the desired temperature value (SV) on the controller.

TC Series Parameter Reset Function

Details how to restore all parameters to their factory default settings.

TC Series Parameter Group Navigation

TC Series Parameter Group 1 Configuration

Details parameters for alarm settings, auto-tuning, and basic PID control tuning.

TC Series Parameter Group 2 Configuration

Covers input types, units, correction, digital filter, and advanced control settings.

TC Series Detailed Parameter Descriptions

TC Series SV Limit Settings

Configures the acceptable range for the set temperature value (SV).

TC Series Control Output Modes

Defines how the controller operates the output for heating, cooling, or SSR drive.

TC Series Alarm and Loop Break Alarm Configuration

Sets up alarm conditions, hysteresis, and loop break alarm monitoring parameters.

TC Series Advanced Configuration Settings

Covers digital input functions, error handling, and parameter protection settings.

TC Series Input Sensor and Range Configuration

TC Series Factory Default Parameter Values

Lists the default factory settings for various parameters in Parameter Group 1 and 2.

TC Series Advanced Functions and Alarms

TC Series Alarm Operation Modes

Explains different alarm types (deviation, absolute) and their operational modes.

TC Series Alarm Option Settings

Defines how alarms latch, reset, or use standby sequences for notification.

TC Series Sensor Break Alarm Detection

Describes the function to detect sensor disconnection and trigger an alarm output.

TC Series Loop Break Alarm (LBA) and SSRP Functionality

TC Series LBA Functionality Explained

Explains the LBA function for detecting control loop instability and triggering alarms.

TC Series SSRP Functionality Explained

Details the SSRP function for advanced control modes like cycle and phase control.

TC Series Control Modes and Tuning

TC Series Control Mode Operations

Explains Standard ON/OFF, Cycle, and Phase control modes for load operation.

TC Series Tuning and Input Signal Processing

Covers auto-tuning, input correction for sensor errors, and digital filtering for signal stability.

TC Series Method Selection and Unit Settings

Details selection of control method, hysteresis for ON/OFF, and temperature unit display.

TC Series Advanced Control and Error Handling

TC Series Manual Reset for Offset Correction

Details how to adjust for temperature differences (offset) in P/PD control modes.

TC Series Error Handling and Digital Input Functions

Covers control output behavior during sensor line breaks and digital input key operations.

TC Series Parameter Lock Functionality

Describes how to prevent unauthorized changes to parameters and SV settings.

TC Series Error Display and Troubleshooting

Lists common error codes, their meanings, and troubleshooting steps.

TC Series Output Connections and Usage

TC Series Relay and SSR Output Application Examples

Shows typical wiring diagrams for relay and SSR drive output configurations.

TC Series Proper Usage and Error Diagnosis

Guides on basic troubleshooting and identifying operational errors for TC series controllers.

TC Series Cautions for Safe Use and Environment

Provides important safety warnings and environmental considerations for installation and operation.