Autonics TC4H - User Manual

H-54
TC Series
Features
Economical Single Display Type, PID Control

Ordering Information

Specifications
Series TC4S TC4SP TC4Y TC4M TC4W TC4H TC4L
Power
supply
AC power 100-240VAC 50/60Hz
AC/DC power 24VAC 50/60Hz, 24-48VDC
Allowable voltage range 90 to 110% of rated voltage
Power
consumption
AC power Max. 5VA (100-240VAC 50/60Hz)
AC/DC power Max. 5VA (24VAC 50/60Hz), Max. 3W (24-48VDC)
Display method 7Segment (red), Other display (green, yellow, red) LED
Character size (W×H) 7.0×15.0
mm
7.4×15.0
mm
9.5×20.0
mm
9.5×20.0
mm
7.0×14.6
mm
11.0×22.0
mm
Input type
RTD DPt100Ω, Cu50Ω (allowable line resistance max. 5Ω per a wire)
Thermocouple K (CA), J (IC), L (IC)
Display
accuracy
※
1
RTD
At room temperature (23
℃
±5
℃
): (PV ±0.5% or ±1
℃
, select the higher one) ±1digit
Out of room temperature range: (PV ±0.5% or ±2
℃
, select the higher one) ±1digit
※
For TC4SP, add ±1
℃
by accuracy standard.
Thermocouple
※1:IncaseoftheACvoltagemodel,SSRdriveoutputmethod(standardON/OFFcontrol,cycle,control,phasecontrol)isavailableto
select.
※
2: It is unavailable for TC4SP, TC4Y.
※
3: 11-pin socket (PG-11, PS-11(N)) for TC4SP: sold separately.
● Realizes ideal temp. controlling with newly developed
PID control algorithm and 100ms high speed sampling
● Built-in relay output or SSR output selectable
: Enables to phase control and cycle control
with SSR drive output (SSRP function)
● Dramatically increased visibility using wide
display part
● Mounting space saving with compact design
: Approx. 38% reduced size compared with
existing model (depth-based)
● SV/PV deviation indicatable
Setting type
Item
Digit
Size
Alarm output
Power supply
Control output
N Indicator - Without control output
R Relay output + SSR drive output
※
1
2 24VAC 50/60Hz, 24-48VDC
4 100-240VAC 50/60Hz
N No alarm output
1 Alarm 1 output
2 Alarm 1 output + Alarm 2 output
※
2
S DIN W48×H48mm (Terminal block type)
SP DIN W48×H48mm (11-pin plug type)
※
3
Y DIN W72×H36mm
M DIN W72×H72mm
H DIN W48×H96mm
W DIN W96×H48mm
L DIN W96×H96mm
4 9999 (4digit)
C Set by touch switch
T Temperature controller
T S 1 4 R4C
※
1: Thermocouple L (IC) type, RTD Cu50Ω
At room temperature (23
℃
±5
℃
)
:
(PV ±0.5% or ±2
℃,selectthe
higher one) ±1digit
Out of room temperature range:

(PV ±0.5% or ±3
℃,selectthe
higher one) ±1digit
In case of TC4SP Series, ±1
℃
will be added.

Autonics TC4H Specifications

General

Model	TC4H
Type	Temperature Controller
Input Type	Thermocouple, RTD
Output Type	Relay, SSR
Display	LED
Power Supply	100-240VAC
Control Method	PID Control
Resolution	0.1°C
Accuracy	±0.3% FS ±1 digit
Operating Temperature	0 to 50°C
Storage Temperature	-20 to 60°C
Dimensions	48 x 48 mm

Summary

TC Series

Key Features of TC Series

Highlights PID control, high-speed sampling, selectable outputs, and improved visibility.

TC Series Ordering Information

TC Series Specifications

TC Series Model Specifications Comparison

Provides a tabular comparison of key specifications across TC4S, TC4SP, TC4Y, TC4M, TC4W, TC4H, TC4L models.

TC Series Wiring Connections

Illustrates the terminal connections for TC4S, TC4SP, TC4Y, and TC4W series models.

TC Series Unit Description

PV Display Operation

Explains the PV display in RUN and parameter setting modes.

Deviation and Auto-tuning Indicators

SV Indicator Function

Explains how the SV indicator works for checking and changing set temperature.

Control and Alarm Output Indicators

Explains the meaning of the OUT, AL1, and AL2 indicator LEDs.

TC Series SV Setting Procedure

TC Series Parameter Reset

TC Series Parameter Group Overview

TC Series Parameter Group 1 Details

Lists parameters like AL1, AL2, Auto tuning, Proportional band, Integral time, etc.

TC Series Parameter Group 2 Details

Lists parameters like Input type, Temperature unit, Input correction, Control type, etc.

TC Series Parameter Group 1 Settings

TC Series Parameter Group 2 Settings

TC Series Parameter Settings

SV Low-Limit Value Setting

Explains setting the lower limit for the set temperature (SV).

SV High-Limit Value Setting

Control Output Operation Modes

Control Type Selection

Describes PID, ON/OFF control type selection.

Control Output Type Selection

SSR Drive Output Methods

AL1 Alarm Operation Settings

AL2 Alarm Operation Settings

Loop Break Alarm (LBA) Monitoring Time

Loop Break Alarm (LBA) Detection Band

Control Output MV on Input Break

Parameter Lock Settings

TC Series Input Sensor and Range

TC Series Parameter Factory Defaults

TC Series Functions: Alarm and Sensor Break

Alarm Operation Modes

Details deviation high-limit, low-limit, high/low-limit, reserve, absolute value alarms.

Alarm Options

Describes standard alarm, alarm latch, and standby sequence options.

Sensor Break Alarm Function

TC Series Loop Break Alarm (LBA)

TC Series SSRP Functionality

TC Series Control Modes

Standard ONOFF Control Mode

Cycle Control Mode

Phase Control Mode

Auto Tuning Functionality

Guide to using the auto-tuning function for PID parameter optimization.

Input Correction Function

Input Digital Filter Function

Control Method Selection

Selecting between PID and ON/OFF control methods.

Hysteresis Setting for ONOFF Control

Manual Reset Function

Control Output MV on Input Break

CoolHeat Functionality

SV HighLow Limit Settings

Parameter Lock Functionality

TC Series Error Displays and Troubleshooting

TC Series Output Connections

TC Series Proper Usage Guidelines

Simple Error Diagnosis

Handling OPEN Error Display

Instructions for dealing with the "OPEN" error indicating sensor issues.

TC Series Usage Cautions