Autool BST-100 User Manual

AUTOOL BST-100 Battery System Tester User Manual
10
NOTE: For REMOTE test, there will be a little tolerance. For any
doubt, take off the battery and select "OUT-OF-VEHICLE" to re-test.
3.4.4 Battery System Standard and Rating
BST-100 battery tester will test each battery according to the
selected system and rating.
Use UP/DOWN key to select according to the actual system
standard and rating marked on the battery. Use UP/DOWN key to
select according to the actual system standard and rating marked on
the battery. See in the below picture, the arrow indicated location.
CCA: Cold Cranking Amps, specified by SAE&BCI, most frequently
used value for starting battery at 0°F (-18°C).
JIS： Japan Industrial Standard, displayed on the battery as combination of
the numbers and letters, e.g. 55D23,80D26.
DIN： German Auto Industry Committee Standard
IEC： Internal Electro technical Commission Standard
EN： European Automobile Industry Association Standard
SAE: Society of Automotive Engineers Standard
GB： China National Standard

Autool BST-100 Specifications

General

Brand	Autool
Model	BST-100
Category	Test Equipment
Language	English