EasyManua.ls Logo

Autool BST-100 - Cranking Test

Autool BST-100
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AUTOOL BST-100 Battery System Tester User Manual
14
After testing: if it's "IN-VEHICLE" test state, press OK key will bring
to Cranking Test.
3.5 Cranking Test
Tester prompts as following:
Starting the engine as prompted, tester will automatically complete
the cranking test and display the result.
Normally, cranking voltage value lower than 9.6V is regarded as
abnormal and it is OK if it is higher than 9.6V.
Test result of the tester includes actual cranking voltage and actual
cranking time.
When cranking test is abnormal, battery test result will also be
displayed at the same time.

Related product manuals