13
STORAGE AND MAINTENANCE
Tidy up
Turn off the power and unplug the power plug.
Put all the connectors back into the accessory box for storage.
Put the ultrasonic cleaner back into the original bottle and seal
it, and wipe the equipment clean with a dry soft cloth.
If it is not used for a long time, open the test liquid valve and
drain the test liquid back into the original bottle for sealed
preservation.
●
Replacement of test liquid
Impurities can be built up in the test liquid after being used for
a period of time. Do not use contaminated test liquid, other-
wise, injector and fuel pumps can be blocked. Drain the test
liquid by removing the level indicator on the left of the main
unit. It is better to clean the fuel tank with a little test liquid
before the tank is filled in with the new liquid. After cleaning,
close the test liquid valve again and pour in new test liquid.
Replacement of fuse
There is a square box marked with a fuse at the power socket
on the left side of the equipment, and the fuse can be seen by
opening the square box. If it is blown, replace it with a new one
(5A).
●
●
●
●
●
To Next Page
Loading...
Need help?
General
