Autool SDT106 - Product Introduction; Overview; Working Theory; Features

6
Built-in Air Pump
Overheat Protection
Pressure Gauge
Fault Indicator
Flow Meter
Flow Adjustment Knob
Oil Drain Valve
Liquid Level Gauge
Air Control Switch
Smoke Control Switch
Yes
Yes
None
None
None
None
None
None
None
Yes
AUTOOL SDT106 auto smoke leak detector is an entry-level
automotive pipeline leak detection tool, which can accurately detect
various leaks in the automotive pipeline system, helping mainte-
nance technicians to quickly locate leaks and solve problems.
Any other use is considered beyond the intended purpose of the
equipment and is prohibited.
PRODUCT INTRODUCTION
Overview
Features
Low oxygen combustion
The AUTOOL smoke leak detector employs a forced combus-
tion smoke generation method in a low oxygen environment. It
is energized by a conductive column to the heating wire, which
rapidly heats up to more than 300°C so that the mineral oil
reaches the ignition point and enters the state of combustion.
Due to the small intake of air flow, it is insufficient to provide
sufficient oxygen to maintain full combustion, thus the combus-
tion mainly occurs on the surface of the heating wire. Subject
to high-temperature heating, the mineral oil retention object
can continue to burn insufficiently around the heating wire,
thus producing a large amount of smoke.
Working
theory
●