Built-in Air Pump
Overheat Protection
Pressure Gauge
Fault Indicator
Flow Meter
Yes
Yes
Yes
None
None
AUTOOL SDT202 smoke leak detector is specially designed to
detect leaks in automotive pipes, compared with AUTOOL SDT
106, a visual pressure gauge and air bag adapter are added,
which makes it more convenient and quick to detect leakage, help
maintenance technicians to quickly solve leakage problems and
save working time and enhance work efficiency.
AUTOOL SDT202 is suitable for all pipes of cars, motorcycles,
snowmobiles, off-road vehicles, dune buggies, light trucks and
speedboats. It’s recommended to use an automobile diagnosis
tool to work with SDT202 to detect car engine problems more
quickly.
Any other use is considered beyond the intended purpose of the
equipment and is prohibited.
PRODUCT INTRODUCTION
Overview
Features
Low oxygen combustion
The AUTOOL smoke leak detector employs a forced combus-
tion smoke generation method in a low oxygen environment. It
is energized by a conductive column to the heating wire, which
rapidly heats up to more than 300°C so that the mineral oil
reaches the ignition point and enters the state of combustion.
Due to the small intake of air flow, it is insufficient to provide
sufficient oxygen to maintain full combustion, thus the combus-
tion mainly occurs on the surface of the heating wire. Subject
to high-temperature heating, the mineral oil retention object
can continue to burn insufficiently around the heating wire,
thus producing a large amount of smoke.
Working
theory
●
6
To Next Page
Loading...