Need help?Do you have a question about the Autophix OM126 and is the answer not in the manual?
General| Brand | Autophix |
|---|---|
| Model | OM126 |
| Category | Measuring Instruments |
| Language | English |
Introduction to the second generation of On-Board Diagnostic regulations.
Explanation of OBD II DTCs, their structure, and how they identify vehicle faults.
Details on finding the standardized 16-cavity connector for diagnostic tools.
Overview of the AUTOPHIX OM126 scan tool and its buttons/display.
Technical specifications of the AUTOPHIX OM126 scan tool.
List of items included with the AUTOPHIX OM126 scan tool.
Function to search for definitions of Diagnostic Trouble Codes stored in the library.
Function to review previously recorded Diagnostic Trouble Codes (DTCs).
Adjusting settings and configurations for the scan tool, such as language and beep.
Procedure for connecting to a computer to review and print diagnostic reports.
Information about the scan tool's software and hardware versions.
Accessing the I/M Readiness status for emissions testing.
Retrieving current, pending, and permanent Diagnostic Trouble Codes from the vehicle.
Clearing emission-related diagnostic information and DTCs from the vehicle's system.
Checking the status of various emissions system monitors (Misfire, Fuel system, etc.).
Viewing live vehicle data parameters (e.g., engine coolant temp, load pct) in real-time.
Displaying snapshot data recorded by the ECU during an emission-related fault.
Testing oxygen sensors for fuel efficiency and emissions issues.
Reading results of on-board diagnostic monitoring for specific components and systems.
Initiating a leak test for the vehicle's EVAP system via the scan tool.
Displaying vehicle identification, calibration, and verification numbers (VIN, CID, CVN).
Details of the warranty coverage for AUTOPHIX products, including exclusions.
Contact information and procedures for returning the scan tool for repair or service.
To Next Page
