18
4.9 Vehicle Info
Select EVAP System Test and press ENTER, the screen will display
the relative information about EVAP system. Some vehicle manufac-
turers do not allow External devices to control vehicle system. If the
car supports this function, it will display as below:
Select [Vehicle Info] and press ENTER, the screen will display the
information, such as VIN (Vehicle identification Number), CID
(Calibration ID) and CVN (Calibration verification number), as shown
below (different cars will shown different data) :
Press EXIT to return to Diagnostic Menu.
EN
To Next Page
Loading...
Need help?
General
