Autotek Street Machine SM1-1000 User Manual

Details the features, controls, and wiring for 2-channel amplifiers.

Details the features, controls, and wiring for 4-channel amplifiers.

Details the features, controls, and wiring for 1-channel mono amplifiers.

Basic stereo application for Street Machine Series 2-channel amplifiers.

Basic mono bridging application for Street Machine Series 2-channel amplifiers.

Using two 2-channel amplifiers for highs and low frequencies in a 2-way system.

Using 4-channel amplifiers as discrete 4-channel full range units.

Utilizing 4-channel amps for 2 or 3 channels via mono bridging.

Implementing a 2-way system using a 4-channel amp for highs and bass.

A 2-way system variation using front/rear fade for balance.

Using mono sub bass amplifiers in bi-amplification systems.

Specific setup guidance for 2-channel and 4-channel amplifiers.

Specific setup guidance for 1-channel mono amplifiers.

Explains the amplifier's protect mode, indicators, and fault isolation.

Discusses causes and solutions for amplifier overheating issues.

Addresses common reasons and checks for low audio output power.

Explains potential causes for amplifier fuses blowing.

Guides on diagnosing why the audio system fails to power on.

Covers common noise issues like hiss and electrical interference.

Details sources of electrical interference in vehicle environments.

Explains engine-related noise issues and methods for resolution.

Addresses persistent noise issues and their potential causes.