AUTOTERM PU-27 - Twait Preheater Setting; Warming Up Modes; Twait Warm Up Temperature; Wait Mode Pump Operation

10
Pump tupe
Pump selection depending on configuration, pre-heater
-
Bosch pump

ADVERS pump
Sign channel
Setting of pre-heater control with the alarm channel. (provided the
pre-heater is connected to the alarm system and a free channel is
available).
-
Pre-heater control OFF

Control ON.
Fact settings
Reset pre-heater settings to default values.
Action of Settings menu keys:
Keys
Action
Navigation through the menu items
Exit from menu to the main screen
Change menu item value
Air heaters settings menu .
Settings menu items:
By T heater
In the “heater T based” mode, the “Set temperature” of the
temperature sensor located in the heater is used for operation.
By T panel
In the “control panel T based” mode, the “Set temperature” of the
temperature sensor located in the control panel is used for
operation.
By T air
In the “exterior T based” mode, the “Set temperature” of the
exterior temperature sensor is used for operation.
By power
In the “Power based” mode, the “Set power” is used for operation.