14
Software version display menu .
In this menu, the information on software versions is
displayed.
- control panel software version;
- product control unit software version;
- Product serial number.
Press any key to exit.
Operating Time settings menu
This menu is intended for setting pre-heater
operating time with a 5 minute step. The operating time
setting range depends on the product the control panel
is connected to.
Action of Operating Time menu keys:
Confirmation of set value and exit from this menu to the main
screen
Hydronic pre-heater start
Start of pre-heater from the main
screen or from the temperature
sensors screen. The indicator will
appear as follows. The pre-heater
operating time count will be
started.
To Next Page
Loading...
