8
Fast access to startup timers activation menu .
For fast access to the timer activation menu from the control panel main screen, press
and hold the key.
This menu is only intended for timer activation.
Timers cannot be edited in this menu.
Action of timers activation menu keys:
Navigation between timers.
Timer activation / deactivation.
Exit from this menu to the main screen
Hydronic pre-heaters settings menu .
BINAR-5S heater settings menu:
Fluid temperature at which the pre-heater switches to standby
mode (heater shuts off and pump continues to operate). When the
fluid temperature drops, the pre-heater exits standby mode (the
heater starts again). The default value for the switch to standby
mode is +88 °C. The temperature for the switch to standby mode
can be set in the +20 to +95 °С range.
In the additional heater mode, the pre-heater operates with the
engine and maintains the set fluid temperature.
To Next Page
Loading...
