Need help?Do you have a question about the Autotrol LOGIX 255-760 Meter and is the answer not in the manual?
General| Metered Regeneration | Yes |
|---|---|
| Inlet/Outlet | 1" NPT |
| Type | Water Softener |
| Valve Size | 1" |
| Operating Pressure | 20-125 PSI |
| Operating Temperature | 34 - 120°F (1 - 49°C) |
| Connection Size | 1" |
| Voltage | 24V |
Essential checks and conditions to meet before installing the water softener system.
Guidance on positioning the softener tank and filling it with media or water.
Detailed steps for attaching the Autotrol LOGIX 255-760 Meter Control Valve to the softener tank.
Instructions for connecting the water softener system to household water supply and drain lines.
Steps for connecting the brine tubing, sight glass, and float assembly to the valve and brine tank.
How to properly connect the drain line from the bypass valve to a suitable drain.
Configuration steps for the Autotrol LOGIX 255-760 meter valve, including hardness and settings.
Final steps for activating and checking the water softener system after installation and programming.
To Next Page
