AUX-Light CAC 50Hz R410A Controller
148
Remote controller’s operation introduction
Basic condition of remote controller
Basic condition for operation
1.Power source
Use 2 pcs No 7 batteries,working voltage:2.0V-5.0V;
2. Signal frequency:infrared frequency 38kHz;
3. Remote distance:max working distance is7m。
Key operation introduction:
1.Temperature setting range 16℃-32℃ ;
2. when heating:When indoor coil temp. is lower than request, the
fan will change into low speed,.
After the temp. reach to the request temp.,it will change into setting
fan speed.