AUX-Light CAC 50Hz R410A Controller
151
MODE button:Select mode , push the button one time, then the operation modes will change in turn as
Auto-Cooling-Dehumidify-Heating
TEMP + button and TEMP - button: Temperature adjustment range: 16~32
FAN button: Change the fan speed will change in turn as: Low-Medium-High-Auto
SWING button: Press this button for the first time when operation, it will start the swing function. Push the
button for the second time, cancel the swing function. (The function is available matched with the
concerned unit)
TIMER/CLOCK button:
Clock Setting: Normally display the clock set currently (display 12:00 for the first electrifying or resetting).
When press the button for 5 seconds, the time display zone will flicker, then press【+】 and 【-】 button
and to adjust hour that uses 12-hour clock including “A.M.” and “P.M.” time;press the button again to
complete the setting.
Timer setting: Press the button to set TIMER ON/OFF , press the button then “ON” will flicker on the
display screen. then press【+】 and 【-】 button and to adjust hour that uses 12-hour clock including
“A.M.” and “P.M.” time;press the button again to complete the setting. The “OFF” setting is the same
methods.
Remark: When setting functions such as mode, temperature, air port and air velocity, display
screen displays all presetting parameters and remains constant; after reaching presetting time,
air conditioner will automatically start as per presetting state.
After setting timing ON and OFF function, pressing button of 【Timer/Clock】can cancel timing
setting.
SLEEP button:
1. Press the button to the sleeping indicator light of indoor unit flashes on;
2. After the setting of sleeping mode,the cooling operation enables the set temperature to increase 1℃
after 1 hour and another 1℃ auto matically after 1hour.
3. After the setting of sleeping mode,the heating operation enables the set temperature to drop 2℃ after
1 hour and another 2℃ auto matically after 1hour.
4. The air condition runs in sleeping mode for 7hours and stops automatically.
Remark:Press the mode or ON/OFF button,the remote controller clears sleeping mode away.
SCREEN button:Press the button to let the LCD display working or not by pressing the button.
To Next Page
Loading...
Need help?
General
