1. Power source:voltage DC 12V;
2. Work temperature range of PCB:(-10~+70)℃;
3. Work humidity range of PCB:RH20%~RH90%;
3.2 Function
Wired controller: XK-01
ON/OFF button:Switch the unit ON/OFF.
Mode button:Select mode , push the button one time, then the operation modes will change in turn as
below: Auto-Cooling-Dehumidify-Heating
Temp + button and Temp - button: Press the button can adjust temperature. Temperature adjustment
range: 16~32℃.
Fan button: Change the fan speed will change in turn as :Auto-Low-Medium-High-Auto
Lock button: Press Temp + button and Temp - button meantime.
Remote receving:Receving signal of remote controller.