AUX-Light CAC 50Hz R410A Controller
153
Notes:Virtually all functions of the wired controller are the same as those of the remote controller and you
should refer to the remote controller instructions.
Wired controller: XK-02
ON/OFF button:Switch the unit ON/OFF.
Mode button:Select mode , push the button one time, then the operation modes will change in turn as
below: Auto-Cooling-Dehumidify-Heating
Temp +/- button: Press the button can adjust temperature. Temperature adjustment range: 16~32℃.
Fan button: Change the fan speed will change in turn as :Auto-Low-Medium-High-Auto
Swing button: Press this button for the first time when operation, it will start the swing function. Push the
button for the second time, cancel the swing function. (The function is available matched with the
concerned unit)
Health button: Press this button change to switch mode: Health mode.
SLEEP button:
1. Press the button to the sleeping indicator light of indoor unit flashes on;
2. After the setting of sleeping mode,the cooling operation enables the set temperature to increase 1℃
after 1 hour and another 1℃ auto matically after 1hour.
To Next Page
Loading...
Need help?
General
