AUX AMWM-H18/4R3F - Page 108

AUX DC Inverter Free Match 50HZ R32
108
6.2.After entering timing time setting interface, the default timing time is 0.5H, at this moment,
press"
∧
" or "
∧
"button to regulate the timing time. If the button is not pressed for 10 seconds,
the timing setting will be canceled, and then return to the state of non-timing.
XK-05
Time off
Room Temp.
C
Time on
Set Temp.
C
Time off
Room Temp.
C
Time on
Set Temp.
C
TI M E R FA N SWING M ODE
FUNCTION ON/OFF
XK-04
6.3.After the setting of timing, press "Timer" button again to confirm. The timing setting is
successful and the time bar will stop blinking.
XK-05